Browse Categories

Brey Krause R-1125 - Harness Mount Bar - Corvette C7

Our Products: Safety > Harnesses > Harness Mounting

Price: $968.94

SKU: R-1125

Brand: Brey-Krause

Brey Krause R-1125 - Harness Mount Bar - Corvette C7

(Click to see larger image and other views)

Make	Model	SubModel	Note	Year
CHEVROLET	CORVETTE		C7 Coupe	2014-2016
CHEVROLET	CORVETTE	Z06	C7 Coupe	2014-2016

Brey-Krause Harness Bar for C7 Corvette incl. Z06: R-1125: BK Logo

Installation: Bar attaches to factory mounting points in "B" pillars.
Brey-Krause had this bar tested by independent labs and certified to handle the loads and forces required by the National Highway Traffic Safety Admin. DOT and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements.

The C7 Harness bar can quickly be removed and installed as desired by the customer. It provides a proper location for mounting shoulder harnesses in relation to driver and passenger which can help prevent further injury during an accident. Proper harness mounting may also help the driver stay in the seat sided to side during high G cornering.

Note: Because of mounting locations in the C7, the b-pillar plastic sail panel covers will require slot on either side to be cut. Sail panels replacements can be ordered from your GM Dealer, part 23176134 for driver side, and part 23176135 for passenger side if you do not want to cut the original panels. Strength requirements for harness mounts are considerably greater than those for harness guide bars since they must support the entire load applied to the belts.

Material: Type 304, stainless steel.

Finish: Powder-coated in durable black wrinkle-finish

Weight: 17.12 lbs.

Models: C7 Coupes and Z06 Coupes
Installation Instructions

Additional Information:
The C7 harness bar presented a unique challenge. The harness holes in the Chevrolet "competition" seats are
unusually low-- too low for drivers of most heights to safely use. For example, the harness holes on the Chevy
competition seats are 4" closer to the seat bottom than they are with this Recaro seat (21" vs 25"):
R-1125 Desc

That said, we didn't want to release a bar that didn't work with the factory competition seats, for those who can safely use them. Our solution was to create a harness bar with 3 possible harness mount location, all 3 of which have been tested and

certified by an independent lab to handle the types of forces required by the National Highway Traffic Safety Admin. DOT

and SAE J385 Rev. MAR 95, Motor Vehicle Seat Belt Anchorages-Performance Requirements. In so doing, we created a

harness bar that is safe to use with the stock seats, safe to use with aftermarket seats, and still allows you to keep (and use)

the factory 3 point seat belt, if you so desire.

The mounts on our C7 harness bar transmit the load from the belts directly into the factory roll hoop. The factory seat belt
bolts are still used, but their primary function is locating the bar and preventing rotation. This provides a much stronger and
more stable bar than using the seat belt bolts alone.

Below are related products you may want to consider.

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.