SCHROTH Profi II-6 Belt

LPI Racing offers SCHROTH Racing Profi II-6 Harness. It features the 2" lap Flexi Lap Belt, the T-bar sub strap and the standard 3" or HANS Specific 2"/3" shoulder belts. All points are wrapped in, so you can add almost any end fitting for your specific application. If you're looking for a HANS specific solution, look to the Profi II-6 HANS.

The belts start as 3" webbing at the cam lock, then after the length adjuster they are 2" webbing which fits completely on the HANS yoke. This gives you the optimal force distribution, entirely on the surface of the HANS. A standard 3" belt will work, however some of the load is not distributed on the HANS.

Another important feature of the HANS specific shoulder belts is the ability to move the anchor points towards each other to achieve the perfect installation geometry. This will help in the Post-Impact phase - very important in a roll-over situation as well.

The main premise behind the 2" lap belt is one of added safety. A 2" belt rides within the crest of the human pelvis where a 3" belt would rest on the edges. This allows you to get the belt up to an inch and a half tighter. That means the lap belt will be working earlier in the accident event because it gets loaded faster. It's also more comfortable and easier to adjust because there's less friction through the adjuster.

Another feature unique to the Profi Series 2" lap belts is the "Flexi Belt". The End Fittings and Cam Latches are wrapped into the harness, making it so that the lap belt can be changed from a Pull Up configuration to a Pull Down. This allows you to set the belt up just the way you want it for your specific situation. It also allows for Bolt In brackets to be wrapped in for the lap belts if needed. Snap in brackets come standard on the laps.

Includes Snap-In attachments at Lap and Sub points. The Shoulders come ready to be wrapped around a roll-bar. Snap or Bolt attachments can be purchased separately. Available in Black, Blue, Red, (Silver available for the standard 3" shoulder belts).

Pull Direction: Pull Up or Pull Down
Shoulder Width: 3 Inch (Standard) or 2"/3"(HANS)
Lap Belt Width: 2 Inch
Sub Belt End Fitting: LV4 with B14 Wrapped-in
Lap Belt End Fitting: LV4 with B14 Wrapped-in
Shoulder End Fitting: LV7 Wrap
Homologation: FIA tags standard
Cam Lock Fixed Point: Anti-Sub Strap
Included Hardware: 4 SG23 7/16" Eyebolts, 8 S3 Washers and 2 SG39 Reinforcement Plates