Setrab Oil Cooler - Series 1, 7 row, M22 Ports

""Setrab Oil Cooler - Series 1, 7 row, M22 Ports - For additional fittings, please see Plumbing Category

Standard Oil Cooler	A	B	C	D	P/N
Series 1, 7 row, M22	8-1/4	6-3/8	2	2	50-107-7612

Notes:
* EOC hp and btu/hr range based on specific performance parameters that if varied may result in different performance results. Low EOC hp and btu/hr range based on typical wet sump high performance application and typical variable parameters. High EOC hp and btu/hr range based on typical dry sump high performance application and typical variable parameters. Wet Sump Parameters include: oil flow rate, 5 gpm; 20/50 engine oil or similar; 130�F ITD; 60mph airflow. Dry Sump Parameters include: oil flow rate, 8 gpm; 20/50 engine oil or similar; 140�F ITD; 80mph airflow.
** Trans/diff btu/hr range based on low/high set of performance variable parameters. Parameters include: Low: 0.75 gpm; Dextron II or similar; 130� F ITD; 60mph airflow. High: 1.5 gpm; Dextron II or similar; 140� F ITD; 80mph airflow.

Standard Oil Cooler	Typical Application	HP engine	?P PSI engine	btu/hr engine	btu/hr diff/gb	?P PSI diff/gb	A	B	C	D	P/N
Series 1, 7 row, M22							8-1/4	6-3/8	2	2	50-107-7612
Series 1, 10 row, M22							8-1/4	6-3/8	3	2	50-110-7612
Series 1, 13 row, M22	diff./gb/ps/valve spring cooler	na	na	na	6.4k-9.5k	<0.5	8-1/4	6-3/8	4	2	50-113-7612
Series 1, 16 row, M22							8-1/4	6-3/8	4-3/4	2	50-116-7612
Series 1, 19 row, M22	diff./gb/small street engine	100-150	2.2/2.6	13k-17k	8.4k-13k	<0.5	8-1/4	6-3/8	5-3/4	2	50-119-7612
Series 1, 25 row, M22	small high perf. engine	160-190	2.1/2.4	17k-22k	10k-15.5k	<0.5	8-1/4	6-3/8	7-1/2	2	50-125-7612
Series 1, 50 row, M22	high perf. engine	300-400	0.9/1.2	29k-40k	na	na	8-1/4	6-3/8	15-1/4	2	50-150-7612
Series 1, 72 row, M22	high perf. engine	600+	0.8/1.0	40k-60k	na	na	8-1/4	6-3/8	22-1/2	2	50-172-7612
Series 4, 32 row, M22										2	50-432-7612