 |
Autopower Street Roll Bar
The Street Roll Bar will provide added roll protection, along with giving your street car a performance look and style.
- In most cars, rear seats and/or convertible top remain in place and useable.
- This roll bar is made of 1.750 x .120 DOM mild steel tube.
|
 |
Autopower Street-Sport Roll Bar
The Street-Sport Roll Bar allows for installation of safety harnesses in your high-performance street car.
- This roll bar has a bolt-in harness mount tube for easy installation of safety harnesses.
- This roll bar is made of 1.750" x .120 DOM mild steel tube.
|
 |
Autopower Race Roll Bar
With the added strength of a diagonal cross brace, the Race Roll Bar is designed for solo, autocross and high speed time trials. Most Race Roll Bars also include a safety harness bar.
- Autopower will select tube size and type for your application.
- This roll bar is made of 1.750" x .120 DOM mild steel tube.
- Cars weighing more than 3,500 lbs. use 2" x .120 ERW steel.
|
 |
Autopower Race Roll Bar With Options
This 4 point roll bar has a bolt-in diagonal cross brace and harness mount tube.
- Autopower will select tube size and type for your needs.
- This roll bar is made of 1.750" x .120 DOM mild steel tube.
- Cars weighing more than 3,500 lbs. use 2" x .120 ERW steel.
- Optional bolt-in diagonal and harness tube can be ordered for this roll bar.
- Quick and easy installation and removal of these race roll bar options allows for access to the back seat for street use.
- Pictured with Adjustable Seat Brace. (Not included)
|
 |
Autopower Bolt-In Roll Cage
The Bolt-In Roll Cage is designed to quickly and easily transform your street car into a race-legal competition car. This cage closely conforms to your car's interior, allowing quick entry & exit. It uses precision-fit, 6 mounting point, slip-tube and bolt-in design. It is approved by SCCA and NASA for open road racing and drifting events. The best fitting pre-fab roll cage you can buy. All roll cages made to order.
- SCCA & NASA-legal for club racing.
- Top-of-the-line in fit and construction.
- Cages are made to order, allowing for tube size and type to be selected.
- Diagonal cross brace and horizontal brace are a permanent weld-in design.
- Autopower will select tube size and type for your needs.
- Most Bolt-In Cages are made of 1.50" or 1.750" x .120 DOM mild steel tube.
- Pictured with Driver's Safety Net. (Not Included)
|
 |
Autopower U-Weld Front Roll Cage Kit
This roll cage kit can be welded to an Autopower roll bar to make a race-legal 6 mounting point roll cage. Autopower will choose tubing size when you place your order.
Most Kits Include:
- 2 forward support braces
- Top windshield cross tube
- 4 door guards under dash bar
- 4 top corner gussets
|
Overview
Autopower roll bars and roll cages meet or exceed the safety requirements for most competition sanctioning organizations including SCCA and NASA.
Every Autopower roll bar or roll cage has been designed to fit specific car models so only minor modifications are necessary for installation. Most Autopower installations are a true bolt-in and require No Welding.
Materials and Safety
DOM or ERW mild steel tubing is designed not to break in the event of a crash. It will deflect and bend while maintaining the integrity of the roll bar or roll cage. Adding a roll bar to your car not only provides additional protection, but can substantially add to chassis stiffness, thereby improving the car's handling characteristics.
Roll Bar Installation
All necessary installation and mounting hardware, including backing plates is included.
Installation Tip from LPI Racing: Achieve a clean, professional looking installation when installing the roll bar through plastic side panels.
Paint Finishes
Most steel products are sprayed with an industrial grade gloss black cover coat for rust protection. EXPECT some paint damage during shipping. You may want to refinish products before final installation. It is best to check fit and drill all holes before you repaint. There is NO paint finish guarantee.
Product Notes
When ordering, specify in the "Order Notes" if your car is equipped with a sunroof or other structure that will require modification to the roll bar.
Some roll bars will require the removal of the rear speakers. If this is a concern, please contact LPI Racing at (406) 420-2400 to determine if removing the speakers is required for your application.
