XRP - Stainless Steel Braided CPE Hose

Our Products: Plumbing > Hoses > XRP - Stainless Steel Braided CPE Hose

Used by top race teams everywhere, the stainless steel braid provides durability and heat resistance. The scientific elastomer, chlorinated polyethylene (CPE), used in the inner liner provides the finest fluid transfer system available with a temperature range from -40° F to +300° F. You may purchase the hose bulk in any length or in packaged pre-cut lengths.

Size	ID	Hose ID / in	Hose OD / in	Max Press	Burst Press	Weight ft/lbs	Min. bend radius / in	P/N**
-4	7/32"	0.219	0.438	1000	6000	0.12	2.00	300004
-6	11/32"	0.344	0.547	1000	6000	0.15	2.50	300006
-8	7/16"	0.438	0.641	1000	5000	0.18	3.50	300008
-10	9/16"	0.562	0.797	1000	5000	0.23	4.00	300010
-12	11/16"	0.688	0.928	1000	4000	0.28	4.50	300012
-16	7/8"	0.875	1.156	750	3000	0.40	5.50	300016
-20	1-1/8"	1.125	1.437	500	2000	0.61	8.00	300020
-24	1-3/8"	1.375	1.703	250	1000	0.78	9.00	300024
-28	1-1/2"	1.500	1.704	250	1000	0.83	11.00	300028
-32	1-13/16"	1.750	2.094	250	800	1.02	12.50	300032

Note:
*) When used with XRP Hose Ends or those conforming to MIL-F-83798A, this stainless steel braided hose is not for power steering or hydraulic impulse applications.
**) Bulk hose lengths may be slightly over or under length specified.
Stainless steel braided CPE hose does not meet the SAE marine specifications for Coast Guard approval and should not be used for marine applications other than racing . This hose is not compatible with brake fluids.

Page 1 of 3 - 1 2 3 Show All